Landjump 4D Very Unique

Le forum des TT Kyosho Land Jump
Répondre
Mar1
Ligue
Ligue
Messages : 106
Inscription : 01 Jan 1970, 01:00
Localisation : KUWAIT
Contact :

Landjump 4D Very Unique

Message par Mar1 » 10 Nov 2009, 06:31

Hello :)

Very unique Landjump 4D ! maybe the first one, could be a prototype, looks very different 8O

Image

Traduction automatique:



Traduction automatique:



Traduction automatique:
Dernière édition par Mar1 le 12 Nov 2009, 08:15, édité 1 fois.
INTEGRA FAN


Avatar de l’utilisateur
victorsaab
Ligue
Ligue
Messages : 120
Inscription : 01 Jan 1970, 01:00

Message par victorsaab » 10 Nov 2009, 12:16

Really a strange Landi.

do you have the car itself or only the photo?

Mar1
Ligue
Ligue
Messages : 106
Inscription : 01 Jan 1970, 01:00
Localisation : KUWAIT
Contact :

Message par Mar1 » 10 Nov 2009, 12:52

Hello victorsaab,

No I don't have it.

It's a scan image from Kyosho 1980 catalog ! maybe if someone here can read Japanese and translate to us what is written there :?:


Traduction automatique:



Traduction automatique:
INTEGRA FAN

Avatar de l’utilisateur
Bullitwist
Elite
Elite
Messages : 2999
Inscription : 01 Jan 1970, 01:00
Localisation : 13220 Châteauneuf les Martigues

Message par Bullitwist » 10 Nov 2009, 15:24

Hello Mar1,

have you seen that : where is located the tank :wink: ?

Some parts are still direct from sheets or square of AU4G, then for the final product end 1980/begining1981 they're made from cast aluminium.

May be only a model for show and pictures ?
Jean-Michel CLAUDEL (licence n° 373)
Ingénieur Arts et Métiers promo AIX 1967
1er pratiquant de la voiture R/C en France (1970)
1er Vice-Président FFMARC responsable TT (1979)
Inventeur du BULLIT (1979), du DFR Rally-Cross (1980) et du TWIST (1983).

Avatar de l’utilisateur
victorsaab
Ligue
Ligue
Messages : 120
Inscription : 01 Jan 1970, 01:00

Message par victorsaab » 10 Nov 2009, 15:27

Hehe, ton traducteur automatique ne fonctionné pas :P

I assume it's a proto for several reasons;
First, bumpers are cut as I do with my vintage cars to run with them. No injected bumper.
Second, the rear trays for the roll cage are machined, not injected. There are other machining parts.
And third, the front suspension has no springs :x

But cool anyway

Avatar de l’utilisateur
simonsg
Elite
Elite
Messages : 2075
Inscription : 01 Jan 1970, 01:00

Message par simonsg » 10 Nov 2009, 20:27

victorsaab a écrit :Hehe, ton traducteur automatique ne fonctionné pas :P

I assume it's a proto for several reasons;
First, bumpers are cut as I do with my vintage cars to run with them. No injected bumper.
Second, the rear trays for the roll cage are machined, not injected. There are other machining parts.
And third, the front suspension has no springs :x

But cool anyway
Another strange thing is the K&B sticker on the radio box and the Enya 21 X mounted on the car .... :?

Traduction pour TR... :wink:
L'autre chose étrange c'est l'autocollant K&B sur la boite radio et l'Enya 21X qui est monté sur la voiture ....
Simon SG
F@ck Fuel Economy
Le Droit de Rouler Vite.
In heaven all interesting peoples are missing.
http://armca.xooit.com/index.php

Avatar de l’utilisateur
victorsaab
Ligue
Ligue
Messages : 120
Inscription : 01 Jan 1970, 01:00

Message par victorsaab » 10 Nov 2009, 23:13

I knew this forum time ago.
But I didn't join it due to the language.
In my case I can partly understand french but I'm only able to write a few words.

I readed the internal rules and I did not see any restriction related to the language.
And I thought it was possible automatic translation into french for english language users.

I honesty think this is a very interesting site as simonsg says, due to its cumulated experience and its content. There are other sites but no so complete in so many aspects.
Of course it's possible an internal rule where you can only speak french and all of us will leave the site, this is usual even in forums in Spain to avoid reading catalan, basc and other local languages. Earnest, I think it would be a loose for us but also for you.
And please take into account that most of us are already writting in a foreign language.


And Simonsg, the Enya engine does no fit with the Landi but really is from those years. All Robbe Expert/Racing came with such engines. In fact one of them is in my runner Landi now :wink:

Avatar de l’utilisateur
simonsg
Elite
Elite
Messages : 2075
Inscription : 01 Jan 1970, 01:00

Message par simonsg » 11 Nov 2009, 13:13

victorsaab a écrit :I knew this forum time ago.
But I didn't join it due to the language.
In my case I can partly understand french but I'm only able to write a few words.

I readed the internal rules and I did not see any restriction related to the language.
And I thought it was possible automatic translation into french for english language users.

I honesty think this is a very interesting site as simonsg says, due to its cumulated experience and its content. There are other sites but no so complete in so many aspects.
Of course it's possible an internal rule where you can only speak french and all of us will leave the site, this is usual even in forums in Spain to avoid reading catalan, basc and other local languages. Earnest, I think it would be a loose for us but also for you.
And please take into account that most of us are already writting in a foreign language.


And Simonsg, the Enya engine does no fit with the Landi but really is from those years. All Robbe Expert/Racing came with such engines. In fact one of them is in my runner Landi now :wink:
Yep was just funy to have the K&B sticker and the Enya 21X mouted on...and keep posting :ok:
Simon SG
F@ck Fuel Economy
Le Droit de Rouler Vite.
In heaven all interesting peoples are missing.
http://armca.xooit.com/index.php

Avatar de l’utilisateur
Bullitwist
Elite
Elite
Messages : 2999
Inscription : 01 Jan 1970, 01:00
Localisation : 13220 Châteauneuf les Martigues

Message par Bullitwist » 11 Nov 2009, 13:28

Hi victorsaab,

OK 100 % with you :D .

I've been living for 10 years in Mauritius Island, and what a pleasure to be able to speak French, English and even Mautian creole, sometimes the three together.

English is really an international language, chiefly for R/C racing cars rules (IFMAR, EFRA, ....).
All that is made in Japan or China is first english language.

About the engine, the first "Land-Jump" in France (april 1981,mine), direct from Japan, was OS 21 equiped, and after, my n° 2 and 3 also.

From what country are you ?
Jean-Michel CLAUDEL (licence n° 373)
Ingénieur Arts et Métiers promo AIX 1967
1er pratiquant de la voiture R/C en France (1970)
1er Vice-Président FFMARC responsable TT (1979)
Inventeur du BULLIT (1979), du DFR Rally-Cross (1980) et du TWIST (1983).

Avatar de l’utilisateur
victorsaab
Ligue
Ligue
Messages : 120
Inscription : 01 Jan 1970, 01:00

Message par victorsaab » 11 Nov 2009, 18:29

Thanks simonsg, if you allow me to do so it will be a pleasure.
Bullitwist a écrit :From what country are you ?
I come from Spain, and living in Barcelona. Here while in a meeting we change from spanish to catalan, english if required and -why not- even german. But unfortunately I had no opportunity to learn french :oops:
And it gives more plurality, so I agree completely with you.

But I partly understand the situation; it's funny to see a post in english once a week, but reading 10% of messages in english is not funny anymore as it seems we are pushing french out, when it's not our intention.

and now...a photo of my Landi runner with Enya :mrgreen:
It came with tunning dampers and really in bad condition.

Image
By victorsaab

Image
By victorsaab

Avatar de l’utilisateur
simonsg
Elite
Elite
Messages : 2075
Inscription : 01 Jan 1970, 01:00

Message par simonsg » 11 Nov 2009, 23:08

Hey its a Toyota... :wink: For me it looks quite in very good shape beside these optional dampers and their frame attachments...nice tuned up look :ok:
Simon SG
F@ck Fuel Economy
Le Droit de Rouler Vite.
In heaven all interesting peoples are missing.
http://armca.xooit.com/index.php

Mar1
Ligue
Ligue
Messages : 106
Inscription : 01 Jan 1970, 01:00
Localisation : KUWAIT
Contact :

Message par Mar1 » 12 Nov 2009, 08:10

Hi Bullitwist,

maybe the fuel tank was not made at the photo time, or it might be inside the radio box :?:
Bullitwist a écrit :Hello Mar1,

have you seen that : where is located the tank :wink: ?

Some parts are still direct from sheets or square of AU4G, then for the final product end 1980/begining1981 they're made from cast aluminium.

May be only a model for show and pictures ?

Traduction automatique:



Traduction automatique:
INTEGRA FAN

Avatar de l’utilisateur
Bullitwist
Elite
Elite
Messages : 2999
Inscription : 01 Jan 1970, 01:00
Localisation : 13220 Châteauneuf les Martigues

Message par Bullitwist » 12 Nov 2009, 09:26

Morning Mar1,

"May be inside the radio box" ?

So it would be a " tank box" :lol: .

No, I'm sure that for this picture, nothing is really quite finished like the product found in R/C racing shops later.

I did the same thing when I had to do the pictures of my "Bullit" for first advertising and cover of the box :lol: .
Jean-Michel CLAUDEL (licence n° 373)
Ingénieur Arts et Métiers promo AIX 1967
1er pratiquant de la voiture R/C en France (1970)
1er Vice-Président FFMARC responsable TT (1979)
Inventeur du BULLIT (1979), du DFR Rally-Cross (1980) et du TWIST (1983).

Mar1
Ligue
Ligue
Messages : 106
Inscription : 01 Jan 1970, 01:00
Localisation : KUWAIT
Contact :

Message par Mar1 » 15 Nov 2009, 08:25

here you see that Kyosho sent the prototype photos to dealers for advertisement purpose, the below photo shows the Landjump 4D prototype in a magazine ad. !

Image

Below Kyosho is testing a second prototype of Landjump 4D now you can see the fuel tank, still prototype but closer to the production version. The radio box and driver doll are still the very early prototypes. Also it shows that Kyosho didn't make their mind whether to use the same tires all around or use the circuit 20 tires in front.

Image


Traduction automatique:
<div id=result_box dir="ltr">Ici vous voyez que Kyosho envoyé les photos de prototypes à des concessionnaires à des fins de publicité, la photo ci-dessous montre le prototype 4D Landjump dans une petite revue. !

[IMG] http://i9.photobucket.com/albums/a96/ma ... JUMP5s.jpg [/ IMG]

Kyosho ci-dessous teste un second prototype de Landjump 4D vous pouvez maintenant voir le réservoir de carburant, encore de prototype, mais proche de la version de production. La boîte de la radio et la poupée de pilotes sont encore des prototypes très tôt. Cela montre également que Kyosho ne m 'a pas de leur esprit si vous souhaitez utiliser les mêmes pneus partout ou utiliser le circuit 20 pneus à l'avant.

[IMG] http://i9.photobucket.com/albums/a96/ma ... JUMP2s.jpg [/ IMG]
INTEGRA FAN

Avatar de l’utilisateur
accelcar01
Découverte
Découverte
Messages : 12
Inscription : 01 Jan 1970, 01:00

Message par accelcar01 » 15 Nov 2009, 10:09

:)
Very nice car and thanks for these documents. It's strange to see a Renault elf sticker on the tadio box! it's seam than renault was famous in 1980 at Japan.

best wish

tamartin
Découverte
Découverte
Messages : 97
Inscription : 01 Jan 1970, 01:00

Message par tamartin » 15 Nov 2009, 10:41

The tires are all the time the ones from the Circuit 20 series.
Only 1 row of studs removed.
These are still wider othan the later Land Jump ones.

And they mounted the bumper on the upside. Strange!!!

Next thing are those pull springs in front, which also appeared in the Graupner catalogue in Germany I think.

The market really demanded a 4-wheel drive car, so Kyosho was in a hurry to finish the Land Jump.

But they did their homework and the first edition was already driveable and reliable.
Other companies realeased their prototypes and failed.
They had to release a second version quickly.
Kyosho only reworked the very weak front suspension, nothing else.







Traduction automatique:
<div id=result_box dir="ltr">Les pneus sont tout le temps ceux du circuit 20 séries.
Seulement 1 rangée de poteaux retirés.
Ces objectifs sont encore plus large othan ceux Aller tard Land.

Et ils ont monté le pare-chocs à la hausse. Étrange!

La prochaine chose sont ceux pull ressorts à l'avant, qui figure aussi dans le catalogue Graupner en Allemagne, je pense.

Le marché réellement exigé une voiture de 4 roues motrices, de sorte Kyosho était pressé de finir la Jump Land.

Mais ils faisaient leurs devoirs et la première édition était déjà DriveABLE et fiable.
D'autres sociétés realeased leurs prototypes et a échoué.
Ils ont dû sortir une deuxième version rapidement.
Kyosho seulement retravaillé la suspension très faibles avant, rien d'autre.





Mar1
Ligue
Ligue
Messages : 106
Inscription : 01 Jan 1970, 01:00
Localisation : KUWAIT
Contact :

Message par Mar1 » 17 Nov 2009, 08:50

The Landjump 4D Hilux version;

Image


Traduction automatique:
INTEGRA FAN

romax66
Découverte
Découverte
Messages : 53
Inscription : 26 Mars 2022, 17:46

Re: Landjump 4D Very Unique

Message par romax66 » 09 Juin 2022, 16:54

J'ai pensé ajouter quelque chose à cette discussion qui, bien qu'ancienne, est toujours intéressante.
La première photo montre ce qui devait être le premier prototype du Land Jump.
Peut-être n'a-t-il jamais été terminé, manquant le réservoir, les ressorts des amortisseurs avant et la manette des gaz.
Sur la photo suivante, vous pouvez voir une machine en action au sol qui semble être une version presque définitive du modèle et indiquée ici comme le deuxième prototype.
En réalité il s'agit d'un troisième prototype dérivé du deuxième prototype qui est celui représenté sur le couvercle de la boîte de la voiture de série.
Image
Maintenant, je vais vous montrer la voiture dans la vraie vie.
Image
Image
Sur le devant nous avons un ressort de rappel les fixations de carrosserie et de transmission sont usinées dans la masse.
Image
Image
Le boîtier radio a la forme d'un trapèze
Image
L'arceau de sécurité est différent de celui d'origine
Image
Image
Le point de fixation est très saillant
Image
Le pilote et le couvercle du boitier radio sont différents
Image

Si cela vous intéresse, d'autres photos suivront. :)

Avatar de l’utilisateur
tontonOlive
Elite
Elite
Messages : 2888
Inscription : 01 Jan 1970, 01:00
Localisation : Haute-Normandie

Re: Landjump 4D Very Unique

Message par tontonOlive » 09 Juin 2022, 19:34

Hello :D

Oui, d'autres photos sont les bienvenues :ok:

Je ne suis pas le seul gourmand ici :lol:

Un de mes multiples projets (oui, je sais j'en ai trop :mrgreen: ) est le premier modèle prototype (en haut de ce post).

J'ai modélisé en 3D d'après les quelques photos et commencé à réunir des pièces (tel l'échappement).

Ce premier prototype a été en partie réalisé avec des pièces existantes et usinées pour d'autres.

Ton prototype V3 est magnifique, à l'image du Romax prototype :bravo:

A bientôt,
Olivier
La passion des autos n'a pas de taille ou d'échelle. Dans les grandes, j'aime la mini parce qu'elle est petite... Dans les petites j'aime les 1/8 parce qu'elles sont grandes!

romax66
Découverte
Découverte
Messages : 53
Inscription : 26 Mars 2022, 17:46

Re: Landjump 4D Very Unique

Message par romax66 » 09 Juin 2022, 20:11

Merci Olivier.
Peut-être que le traducteur n'était pas clair, c'est un V2, le V3 est celui des photos avant le mien. :)

Avatar de l’utilisateur
Franck 11200
Ligue
Ligue
Messages : 223
Inscription : 12 Juin 2019, 13:39
Localisation : 11 Aude

Re: Landjump 4D Very Unique

Message par Franck 11200 » 09 Juin 2022, 20:22

Magnifique ! Tu peux mettre d'autres photos sans souci :D

romax66
Découverte
Découverte
Messages : 53
Inscription : 26 Mars 2022, 17:46

Re: Landjump 4D Very Unique

Message par romax66 » 09 Juin 2022, 20:31

Franck 11200 a écrit :
09 Juin 2022, 20:22
Magnifique ! Tu peux mettre d'autres photos sans souci :D
Ça sera fait :ok:

romax66
Découverte
Découverte
Messages : 53
Inscription : 26 Mars 2022, 17:46

Re: Landjump 4D Very Unique

Message par romax66 » 13 Juin 2022, 17:01

Quelques photos de la machine pendant le traitement.
Ils aident à comprendre le travail effectué.
Image
Image
Image
Image
Image


Répondre

Revenir vers « TT Kyosho Land Jump »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 1 invité