Lunar Module just landing
Lunar Module just landing
Bonjour, Lunar Module is just landing here
This Motor Unit is for RC300 Super Light Weight which is my next project in coming.
Motor pod is Very thin but quite enough for the strength. Thickness is 3.5mm based on 70/75 Aluminum.
The motor is Picco SE with the custom sinkhead. also with McCOY Can Muff. The hub of rim is made by Magnesium.
The most interesting thing is the rear exhaust for RC300 Rigid !Hope it will be completed someday
ASSOCISTA
This Motor Unit is for RC300 Super Light Weight which is my next project in coming.
Motor pod is Very thin but quite enough for the strength. Thickness is 3.5mm based on 70/75 Aluminum.
The motor is Picco SE with the custom sinkhead. also with McCOY Can Muff. The hub of rim is made by Magnesium.
The most interesting thing is the rear exhaust for RC300 Rigid !Hope it will be completed someday
ASSOCISTA
Hi OCA1, Many thanks for your nice count down &
ASSOCISTA
ASSOCISTA
Dernière édition par assocista le 29 Juin 2011, 00:42, édité 1 fois.
Bonjour ! All
My RC300 (Oil plant Project) just completed. Following is the specification for it.
*Article : ASSOCIATED RC300 Rigid
*F/Chassis : FRP G-10 Ishihara's Outline spec
*R/Chassis : Lt Weight custom en/70's
*Radio Plate : ASSOCISTA's spec by CFRP
*Air Chamber : ASSOCISTA's spec
*Motor : Picco RE with the custom Sink Head
*Carb : Delta Slide with Marrot Air Funnel
*Muff : McCOY Can
*Mini : Picco original
*Rear Bulkhead : Team ASSOCIATED milled Light Weight
*and some more custom parts
Enjoy !
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-1"></a>[/img]
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-2"></a>[/img]
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-3"></a>[/img]
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-4"></a>[/img]
ASSOCISTA
My RC300 (Oil plant Project) just completed. Following is the specification for it.
*Article : ASSOCIATED RC300 Rigid
*F/Chassis : FRP G-10 Ishihara's Outline spec
*R/Chassis : Lt Weight custom en/70's
*Radio Plate : ASSOCISTA's spec by CFRP
*Air Chamber : ASSOCISTA's spec
*Motor : Picco RE with the custom Sink Head
*Carb : Delta Slide with Marrot Air Funnel
*Muff : McCOY Can
*Mini : Picco original
*Rear Bulkhead : Team ASSOCIATED milled Light Weight
*and some more custom parts
Enjoy !
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-1"></a>[/img]
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-2"></a>[/img]
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-3"></a>[/img]
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... 300-4"></a>[/img]
ASSOCISTA
- vintagerccar
- Expert*
- Messages : 438
- Inscription : 01 Jan 1970, 01:00
- Localisation : Noyelles les Vermelles 62980
Good evening Mitsuyu,
It's always a great pleasure to see your cars.
I hope that one day i would be able to realise so much beautiful cars like yours .
The rigid hose beetween the exhaust pressure pipe and the tank is used to .
Emmanuel.
It's always a great pleasure to see your cars.
I hope that one day i would be able to realise so much beautiful cars like yours .
The rigid hose beetween the exhaust pressure pipe and the tank is used to .
- Reduce pressure
- Reduce air temperature
- Reduce pressure and temperature
Emmanuel.
Boulmé Emmanuel
http://vintagerccar62.free.fr/index.php
emmanuel.boulme@gmail.com
http://vintagerccar62.free.fr/index.php
emmanuel.boulme@gmail.com
Hi Emmanuel, Many thanks for your great comment alwaysvintagerccar a écrit :Good evening Mitsuyu,
It's always a great pleasure to see your cars.
I hope that one day i would be able to realise so much beautiful cars like yours .
The rigid hose beetween the exhaust pressure pipe and the tank is used to .With all my kind greetings from France.
- Reduce pressure
- Reduce air temperature
- Reduce pressure and temperature
Emmanuel.
My custom air chamber is to supply air pressure constantly.
It was inspired from RC500 which was assembled by Ron Paris.
Ron made it for Ralph Burch Jr. and He get the 1st place on the ROAR.
I just realize such way by the brass pipe & Aluminum block.
Especially I would like to show up more visibly like the industrial factory
[img]<a%20href="http://www.flickr.com/photos/71346043@N ... Paris"></a>[/img]
Thanks a lot again, Emmanuel
ASSOCISTA
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 13 invités