Bonjour à tous,
D'habitude, on démonte les pneus pour récupérer les jantes
Moi je voudrai faire l'inverse
Puis-je démonter des pneus mousse sans les abimer pour les recoller sur d'autres jantes avec la technique des vapeurs d'acétone
Bien entendu, toute autre méthode efficace est bienvenue
A bientôt,
Olivier
récupération de pneus mousse
Modérateur : Animateur restauration
- tontonOlive
- Elite
- Messages : 2926
- Inscription : 01 Jan 1970, 01:00
- Localisation : Haute-Normandie
récupération de pneus mousse
Model-Tribute : la possibilité de refaire quelques pièces pour vos modèles
Hello,
I have a very effektive methode, but I don´t know how to describe it, but I try:
Search for a point/place, were the rubber is mostly loose. Sting carefuly between the rubber and the rim a long, round thing like a screw-driver (I always use a hudy 2,5mm hex driver, as longer, as better) .
If the tip of the screw driver looks out the other side of the glued tire, begind to turn it carefuly in left and right direction while you hold/fix the side with hex tip with your other hand.
What I mean: Hold the tip and press it in the direction you built up the pressure while you turn the screw-driver left and right.
(You will feel the effect)
In this way you can release all rubbers from the rim AND to 90% you can use the released rubber for any other application!
Hope you understand what I mean...
If not, please send me a PM with your @, and I will send you a video!
I have a very effektive methode, but I don´t know how to describe it, but I try:
Search for a point/place, were the rubber is mostly loose. Sting carefuly between the rubber and the rim a long, round thing like a screw-driver (I always use a hudy 2,5mm hex driver, as longer, as better) .
If the tip of the screw driver looks out the other side of the glued tire, begind to turn it carefuly in left and right direction while you hold/fix the side with hex tip with your other hand.
What I mean: Hold the tip and press it in the direction you built up the pressure while you turn the screw-driver left and right.
(You will feel the effect)
In this way you can release all rubbers from the rim AND to 90% you can use the released rubber for any other application!
Hope you understand what I mean...
If not, please send me a PM with your @, and I will send you a video!
Salutations, best regards, viele Grüße,
Peter
Peter
- tontonOlive
- Elite
- Messages : 2926
- Inscription : 01 Jan 1970, 01:00
- Localisation : Haute-Normandie
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 5 invités